Galvanized steel 26-3/4” x 138” x 1/4” with (24) 1/4” countersunk holes
The construction company presented SLIPNOT Metal Safety Flooring with a detailed drawing of the material needed to retrofit / cover the slippery area at the University of Texas at San Antonio. The drawing called for galvanized steel custom cut to 26-3/4” x 138” x 1/4” with (24) 1/4” countersunk holes for installation to the existing concrete. Countersunk holes are just one of many mounting options that can be offered with SLIPNOT material. This is the ideal and easiest way to install slip resistant metal flooring products to concrete. The only requirements for this method of installation is pre-drilling the concrete and attaching the plate in place with flathead screws. SLIPNOT material can also be welded in place whether it is tack welding, seam welding or plug hole welding. The SLIPNOT galvanized steel slip resistant cover plate was chosen not only because it is a file hard, long lasting non-slip product, it will also easily maintain its slip resistance in all weather and pedestrian traffic extremes.