Search SLIPNOT

SLIPNOT grating walkway through a plant

Technical information.

Drawings, specification language and fabrication guidance for the architects, engineers and fabricators who specify SLIPNOT.

DWG drawings
34
PDF drawings
30
Specification
CSI 3-part
Custom drawings
On request

Spec downloads

The CAD drawings below are examples of the material and fabrication we can do, grouped by product. Custom drawings are available on request; contact a representative for more information.

Customization

Customize a finished product to your design specifications

Send drawings and we cut, form and finish to them, or ship us your own material and we manufacture the all-metal product. Our sales team reviews your design specs before quoting.

What we can customize

  • Size and shape. Cut, formed and fabricated to job specifications.

  • Finish. Painted black, safety yellow or a custom color, galvanized.

  • Identification. Logos, words, ID marks and masked borders where the surface should not go.

Additional resources

Standards & test results

The slip-resistance test methods and regulations SLIPNOT is tested against, and our certifications.

Fabricating instructions

SLIPNOT offers the right fabricating instructions to fit your project.

Galvanizing guidelines

What a galvanizer must do, and avoid, to keep the SLIPNOT surface intact.

Care & cleaning

How to keep the peaks and valleys clear on steel, stainless steel and aluminum.

Get a quote

Tell us about your project, upload your drawings or specs and our safety experts will build a custom quote for you.

Get a sample

See and feel the surface before you specify it. We will send a sample in the metal and finish you are considering.

FAQs

Which drawing formats do you provide?

Every drawing comes as an AutoCAD DWG file, and most also as a PDF. They show examples of the material and fabrication we can do. Custom drawings are available on request; contact a representative.

Is there specification language I can put in my project documents?

Yes. The SLIPNOT CSI 3-part specification follows The Construction Specifications Institute format and describes what makes the SLIPNOT material unique. It is a Word document, so you can edit it into your project manual.

Can SLIPNOT be cut and welded after the surface is bonded?

Yes. Flame, plasma, laser and water-jet cutting work as they do on smooth plate, and the surface will not flake along the cut. Shearing works too, but the hardened surface dulls blades quickly. All SLIPNOT materials are weldable, directly or from the opposite side, without affecting the surface. Do not weld galvanized material.

Should holes be drilled before or after the surface is bonded?

Before, whenever you can. Pre-drilled holes, countersinks and counterbores are protected during surfacing, so screws and bolts sit flush. Drilling afterward is possible, but the surface hardness adds time and tooling cost.

How tightly can SLIPNOT be bent?

Air-bend to an internal angle of 75° to 90° with a bend radius of 3/4" or more. Tighter radii are possible, but the risk of surface cracking or delamination rises as the radius shrinks.

Can SLIPNOT be galvanized?

Yes. SLIPNOT supplies galvanized steel products to ASTM A123 and strongly recommends that we do the hot-dip galvanizing. If a third party galvanizes the material, our galvanizing guidelines must be followed.

Do you offer continuing education for specifiers?

Yes. SLIPNOT offers an AIA-approved CEU course, in person or virtual, covering products that improve workplace safety and productivity and the current regulatory standards. Participants receive a certificate for self-reporting credit. Contact us to schedule a lunch and learn.