The standards SLIPNOT is tested against
Test methods
Slip-resistance test methods
SLIPNOT products exceed industry standards and recommended safety guidelines. For specific test results, call 800.754.7668 or email info@slipnot.com.
| Standard | What it measures | Status |
|---|---|---|
| ANSI A137.1 | Dynamic coefficient of friction (DCOF) of hard-surface indoor level floors, measured wet with a BOT-3000E digital tribometer. | Current |
| ANSI B101.3 | DCOF of common hard-surface floor materials, measured wet with a BOT-3000E tribometer, with recommended minimums for level floors and ramps. | Current |
| ASTM F1677 | Wet and dry testing with a portable inclinable articulated strut tester (Brungraber Mark II), avoiding adhesion by applying forces together. | Current |
| ASTM F1679 | Wet and dry testing with a variable incidence tribometer (English XL), usable on nearly all surfaces by certified operators. | Withdrawn 2006 |
| ASTM C1028 | Static coefficient of friction of tile and other surfaces, wet and dry, with a 50 lb drag sled and Neolite heel assemblies. | Withdrawn 2006 |
| ASTM D2047 | Laboratory static coefficient of friction using the James Machine; not suited to wet testing. | No longer used |
Regulations
Regulations and guidelines
Where the codes call for slip-resistant walking surfaces, and what they cover.
| Standard | What it covers |
|---|---|
| OSHA 29 CFR 1910 | Stair treads must be reasonably slip resistant and nosings of non-slip finish; manlift steps need inherent non-slip surfaces or a secured non-slip tread. |
| ADA | Accessible routes and ramps need stable, firm, slip-resistant surfaces; the Access Board recommends higher slip resistance on ramps than on level routes. |
| NFPA 1901 | Sets minimum slip resistance for exterior and interior walking and standing surfaces on automotive fire apparatus, wet. |
| ANSI A1264.2 | Reducing slips in the workplace: hazard provisions (footwear, mats, housekeeping, warnings, surface selection), test equipment and slip-resistance criteria. |
| ASTM F1637 | Design, construction and maintenance practice for safe walking surfaces in new and existing buildings. |
| ASTM F802 | Guide to selecting walkway surfaces where foreign materials could cause a slip or fall. |
