Search SLIPNOT

Wet stainless floor above a production line

Care and cleaning.

Clean SLIPNOT regularly to keep dirt, grease and debris from filling the surface valleys and reducing traction. Most standard cleaning agents work, but check our metal-specific guidelines below for steel, aluminum and stainless steel.

Debris
Air or soft brush
Heavy grime
Stiff brush, power wash
Grease and oil
Organic solvent
Questions
800.754.7668

Steel

  • Mill-finish steel rusts when exposed to moisture or humidity. Prime and paint the metal, or hot-dip galvanize it for the best long-term protection.

  • Power wash or scrub with a stiff-bristle brush to clear dirt from the high-traction texture.

  • Apply an industrial degreaser or standard solvent, scrubbing as needed, to break up oil deposits.

Stainless steel

  • Stainless steel provides maximum protection against harsh facility washdowns, from strong acids to heavy cleaning solutions.

  • Watch out for surface staining from enzyme cleaners and industrial soaps that can darken the metal finish.

  • Wipe away light rust spots with a half-water, half-muriatic-acid mix, and chemically treat welded joints to clean off dark heat marks.

Aluminum

  • Aluminum is softer than steel, so avoid harsh abrasive tools that could scratch or wear down the high-traction texture.

  • Power wash or scrub with a stiff-bristle brush, but avoid heavy pressure that could wear down the surface over time.

  • Wash with standard cleaners like trisodium phosphate solutions to remove dirt, and use simple degreasers or solvents to clean up oil and grease.

Ask about your cleaning conditions

Get a quote

Tell us about your project, upload your drawings or specs and our safety experts will build a custom quote for you.

Get a sample

See and feel the surface before you specify it. We will send a sample in the metal and finish you are considering.